- Issue Time
The outbreak of the new crown epidemic in 2020 and the application of masks have pushed spunbond nonwovens to the apex. So what is the working principle of the spunbond nonwoven machine? This article will specifically introduce the working principle of the spunbonded nonwoven machine.
Spunbond technology has a long history, so what is the working principle of the spunbond nonwoven machine? Let me introduce the working principle of the spunbond non-woven fabric machine in detail below.
1. Slicing and baking
The polymer chips obtained by pelletizing on the conveyor belt usually contain a certain amount of moisture,which must be dried and removed before spinning. For non-aqueous polymer chips, such as polypropylene, it is not necessary to dry.
The spinning equipment and process used in spunbond are basically the same as those of chemical fiber spinning. The main equipment and accessories are screw extruder and spinneret.
The newly formed melt-spun fiber (nascent fiber) has low strength, large elongation, and extremely unstable structure. Therefore, it does not have the properties required for textile processing and must be stretched.
4. Separate wire
The so-called splitting refers to the separation of the stretched tow into monofilaments to prevent the fibers from adhering to each other when forming a web
5. Laying the net
The drawn and divided filaments must be evenly laid on the netting curtain. The key to netting is to control the movement of the filament, and its control methods mainly include air flow control and mechanical control.
6. Suck the net
Through the suction net, the downward blowing air flow can be taken away, and the bounce of the tow can be controlled. For this reason, a 20cm-thick vertical diversion air-distributing orifice plate is arranged under the netting curtain to prevent the reverse airflow from blowing over the fiber mesh. A pair of windshield rolls are provided at the suction boundary in the forward direction of the web. The upper roll has a larger diameter and is relatively smooth, and a cleaning knife is set to prevent rolls. The lower roll has a smaller diameter. Rubber rolls are usually used to clamp the web. And into a net curtain. The auxiliary suction duct directly sucks in the air pressure net to control the fiber net to attach to the net curtain.
Reinforcement is the last process. Through reinforcement, the fiber web has certain strength, elongation and other properties to meet the requirements of the product.
Only if you are familiar with the working principle of the spunbond non-woven machine can you produce a good non-woven fabric. If you want to know more about the spunbond non-woven machine, you can contact We get more detailed solutions.
Professional production technology and excellent manufacturing team make us a leading non-woven machine manufacturer. We have a strict production department and a complete quality management system, and we will conduct strict quality inspections on every component of the product. We can also provide you with thoughtful one-stop service according to your needs. If you are interested in our spunbond nonwoven machine, please contact us immediately!